MUREXIN X-BOND MS-K 499 adhesive, 5 kg

It is a single-component adhesive tested according to the STN EN 14259 standard, intended for bonding LVT design coverings, homogeneous and heterogeneous PVC, CV coverings, rubber coverings in strips and tiles up to a thickness of 10 mm, as well as protective and artificial grass coverings. Thanks to its composition without volatile substances, it is also suitable for spaces with higher requirements for air cleanliness.

The adhesive is waterproof and hard-elastic, suitable especially under increased thermal and mechanical loading and under increased moisture loading. It can be used to bond onto absorbent as well as non-absorbent substrates indoors, outdoors and in damp spaces. The colour of the adhesive is light beige and it is supplied in a practical 5 kg bucket.

Recommended notching and consumption: A1 approx. 300 – 450 g/m², A2 approx. 370 – 520 g/m², B1 approx. 400 – 550 g/m², B2 approx. 500 – 680 g/m². The consumption is governed by the type of covering and the chosen trowel notching.

Main advantages

• Single-component processing – the adhesive does not need to be mixed, it saves time during laying and reduces the risk of error in the ratio of components.
• Waterproof and hard-elastic – resists moisture and at the same time transfers the mechanical stress of the floor.
• Without volatile substances – also suitable for spaces with requirements for low emissivity and a cleaner working environment.
• Resistance to thermal and mechanical loading – reliable even under increased loading of the floor.
• Universal for interior and exterior – bonds onto absorbent as well as non-absorbent substrates including damp spaces.
• Tested according to STN EN 14259 – verified properties for bonding resilient floor coverings.

Use

• Bonding LVT design floor coverings.
• Laying homogeneous and heterogeneous PVC and CV coverings.
• Bonding rubber coverings in strips and tiles up to a thickness of 10 mm.
• Application of protective and artificial grass coverings.
• Laying in spaces with increased thermal, mechanical or moisture loading.
• Bonding onto absorbent as well as non-absorbent substrates indoors, outdoors and in damp spaces.

Frequently asked questions

What coverings is X-BOND MS-K 499 adhesive intended for?

It is intended for LVT design coverings, homogeneous and heterogeneous PVC, CV coverings, rubber coverings in strips and tiles up to a thickness of 10 mm and for protective and artificial grass coverings.

What is the consumption of the adhesive?

The consumption depends on the trowel notching: A1 approx. 300 – 450 g/m², A2 approx. 370 – 520 g/m², B1 approx. 400 – 550 g/m² and B2 approx. 500 – 680 g/m².

Can the adhesive be used in damp spaces and in exteriors?

Yes, it is waterproof and suitable for bonding onto absorbent as well as non-absorbent substrates indoors, outdoors and in damp spaces, especially under increased moisture and thermal loading.