Dispersion adhesive MUREXIN D 495, 6 kg

Adhesive D 495 is intended for bonding design floor coverings indoors. It is reinforced with fibres, which gives it great dimensional stability and high initial tack. Thanks to its short flash-off time it enables a quick and convenient procedure during laying.

It contains no solvents and has a low emission content, which is why it is also suitable for spaces with increased requirements for air cleanliness. Processing is universal and simple, and the adhesive is suitable especially where emphasis is placed on the dimensional stability of the bonded covering.

Consumption is approximately 250 – 350 g/m² depending on the substrate and the back of the floor covering. The packaging is a 6 kg bucket.

Main advantages

• Fibre-reinforced – ensures great dimensional stability of the bonded covering.
• Great initial tack – the covering holds reliably from the very start of laying.
• Short flash-off time – speeds up and simplifies the entire bonding process.
• Solvent-free and with low emission content – gentle on the interior environment.
• Universal use – suitable for a wide range of floor coverings.
• Practical 6 kg bucket – sufficient for ordinary laying at a consumption of 250 – 350 g/m².

Use

• Bonding design PVC („vinyl“) in strips and tiles indoors.
• Bonding PVC and CV coverings of every kind, in strips and tiles.
• Bonding rubber coverings in strips and tiles up to a thickness of 3.2 mm (above this thickness after consultation with the supplier).
• Bonding polyolefin coverings without chlorine content.
• Bonding into a wet bed with increased requirements for the dimensional stability of the covering.

Frequently asked questions

What coverings is adhesive D 495 suitable for?

It is intended for bonding design PVC („vinyl“), PVC and CV coverings in strips and tiles, rubber coverings up to a thickness of 3.2 mm and polyolefin coverings without chlorine content indoors.

What is the adhesive consumption?

Consumption is approximately 250 – 350 g/m² depending on the substrate and the back of the floor covering.

Does the adhesive contain solvents?

No, adhesive D 495 contains no solvents and has a low emission content, thanks to which it is also suitable for interiors with increased requirements for air cleanliness.