Dispersion adhesive MUREXIN D 495, 14 kg

Adhesive D 495 is reinforced with fibres, thanks to which it ensures great dimensional stability of the bonded covering. It is therefore very suitable everywhere there are increased requirements for the covering not to change its dimensions after bonding. It is applied indoors for bonding design PVC (so-called „vinyl“), PVC and CV coverings of every kind in strips and tiles.

In addition to design coverings, you will also use it for rubber in strips and tiles up to a thickness of 3.2 mm (greater thicknesses after consultation with the supplier) and for polyolefin coverings without chlorine content. The adhesive contains no solvents and has a low emission content, which makes it a suitable choice for interiors with an emphasis on a healthy environment.

Consumption is approximately 250 – 350 g/m² depending on the substrate and the back of the floor covering. One bucket thus comfortably covers a larger area with controlled and even application.

Main advantages

• Fibre-reinforced – ensures great dimensional stability of the bonded covering even under increased requirements.
• Great initial tack – the covering holds reliably immediately after laying.
• Short flash-off time – speeds up and simplifies the bonding itself.
• Solvent-free and with low emission content – suitable for interiors with an emphasis on a healthy environment.
• Universal use – one adhesive for a whole range of design and polyolefin coverings.
• Easy to process – simple and convenient application into a wet bed.

Use

• Bonding design PVC („vinyl“) indoors.
• PVC and CV coverings of every kind in strips and tiles.
• Rubber coverings in strips and tiles up to a thickness of 3.2 mm (greater after consultation with the supplier).
• Polyolefin coverings without chlorine content.
• Applications with increased requirements for the dimensional stability of the bonded covering.

Frequently asked questions

What coverings is adhesive D 495 suitable for?

It is suitable for design PVC („vinyl“), PVC and CV coverings in strips and tiles, rubber in strips and tiles up to a thickness of 3.2 mm, and for polyolefin coverings without chlorine content.

What is the adhesive consumption?

Consumption is approximately 250 – 350 g/m² depending on the substrate and the back of the floor covering.

Does the adhesive contain solvents?

No, the adhesive contains no solvents and has a low emission content, so it is suitable for interiors with an emphasis on a healthy environment.